ZL, MT 6. 12. 7 ZL) Choke knob 8. VIKING specialist accessories or attachments approved by exhaustive. Always use the machine in a dealer. VIKING, is forbidden and results in voiding reasonable and responsible manner and of the warranty cover.
Information Due to the physical danger to the user or.. VIKING recommends VIKING specialist due to holes, mounds, impacts, etc.
Risk of injury to hands and fingers! Before starting the engine, disengage the.. When working together in a group, always position of the mowing blades on the inform the others in advance of what you models MT 5.
Z, MT 6. 11. 2 C, – If visibility is poor (e. Genuine VIKING high pressure cleaners. VIKING in section .
Description of symbols Risk of injury: Do not drive or mow on slopes with an inclination greater than 1. Danger of tipping over! Caution: Read and follow the instruction manual and the safety instructions before initial use. Risk of injury: Keep other persons out of the danger area. Standard equipment Item Designation Qty. Basic unit Grass catcher box Ignition key . Operations prior to initial On releasing the ignition key, it returns automatically to the .
Note Prior to all operations on the ride- on When the engine is stopped, a mower, carefully read and observe signal tone is activated after 2. Mowing deck switch (MT 5. MT 5. 09. 7 C, MT 5. Z, MT 5. 11. 2 Z) The mowing deck switch can be used to engage the mowing deck when the engine.. For reverse mowing, briefly press the If necessary, the electronics can be current driving speed is maintained. The reverse mowing safety switch (1) once programmed so that the mowing foot can be removed from the drive pedal.
The ride- on mower drives in the selected direction after the drive pedal is actuated –.. Press down drive pedal (1). MT 6. 11. 2 C, MT 6. ZL und 8. 1. 3 Brake pedal.. Releasing the parking brake: Releasing the cutting height adjustment Locking the cutting height adjustment lever: lever: Briefly press on brake pedal (1) with the With the mowing deck installed Pull the Guide the cutting height adjustment foot. The time for the filled grass catcher box 9. Electronics signal is adjusted by modifying the length of the (grass catcher box) level sensor.
In order to ensure safe operation, the ride- on mower is equipped with electronics This allows you to adapt filling of the grass.. If the fault cannot be rectified, connections and connect the wiring detailed diagnosis is necessary. If the continuous beep continues to sound even after the battery is correctly connected, an electronic fault is 9.
Electronics faults..(e. The engine will be stopped within 3 Consult your specialist dealer.
The hour meter cannot be reset. VIKING recommends VIKING The correct times for maintenance or specialist dealers. Consult your specialist dealer.
The seat switch is one of the ride- on Grass catcher box full symbol: VIKING recommends VIKING mower's safety devices ( 1. The grass catcher box is full, a If the . Ground- conserving working The mowing deck, particularly the –.. MT 5. 09. 7, MT 5. C, MT 5. 09. 7 Z, the maintenance schedule and carry MT 5. Z, MT 6. 11. 2 C, MT 6.
ZL: out all relevant maintenance Tank cap: Following disengagement, the mowing operations. Set the throttle lever to the choke . MT 5. 09. 7 Z, MT 5. Z, MT 6. 11. 2 ZL, 1. Starting the engine MT 6. ZL: Avoid damage to the machine. Set the throttle lever to the MAX 1.
Driving.. With the mowing deck removed, press press the cruise control button for 1 the V- belt tensioner lever forwards and second. Deactivating automatic Do not engage the mowing deck in tall disengagement: Disengage the mowing deck in the grass or when set to the lowest cutting following sequence: . Serial De Rise Of Nations Gold Edition. Only empty the grass catcher box . Releasing the V- belt from the tension Lift up the mowing deck slightly and hold. Insert cotter pin (3) into the retaining pin bores from above and allow Press V- belt tensioner lever (1) forwards to engage. Due to heavy- duty use, especially VIKING recommends in professional operation, shorter – Wear and damage to tyres. VIKING specialist dealers.
General maintenance instructions: Moreover, extreme external –..– An inspection by your specialist dealer impairing the safe operation of your . VIKING machine. If you are unable clean using running water and a brush VIKING recommends to remove the dirt with water using well away from the machine. Closing the engine hood Unscrew the retaining nuts (1), remove the Push the discharge chute (1) in to the stop. When pushing in, ensure that the discharge chute fits over the discharge Close the engine hood (1) carefully and The . Allow the engine to cool down before topping up the engine oil or before changing the oil. The engine cannot be started when the .
Checking the seat switch: engine. If a suitable lifting platform is.. Turn the mowing blades as shown and . Installing mowing blades: check the angle A (approx. Before installing, check the mowing Removing the mowing blades: blades for damage (notches or..
Only lift the machine at suitable screw. Never lift or support the .
MT 6. 12. 7 ZL: Check the installation position of the . When removing the rear wheels, ensure that the couplers (feather keys) are not lost. Installing the wheel: Avoid damage to the machine. Before installing the rear wheels, ensure that the couplers (feather keys) are correctly positioned in the groove of the wheel axle. Inflate Unscrew the retaining nut (1) and remove the tyres to the following tyre pressures the battery compartment cover (2)Installation position: 1.
Removing and installing the battery Risk of injury! Always remove the black negative (–) cable first and only then, the red positive (+) cable. When connecting the battery, always connect the red positive (+) cable first. The battery is maintenance free and must only be replaced if it is damaged and must be removed in the case of prolonged..
A 1. 0 A differs from the specified rating MT 5. Z 1. 5 A 1. 0 A (ampere). MT 5. 11. 2 Z 1. 5 A 1. A If a new fuse blows within a short MT 6.
C 1. 0 A 1. 0 A time, an electrical fault (e. Combustion engine . MT 5. 11. 2 Z, MT 6.
C, MT 6. 11. 2 ZL: valuable resources can be re- used. Hans Peter Stihl- Strasse 5 machine: A- 6. Langkampfen/Kufstein –.. Applicable conformity assessment VIKING Gmb.
H MT 5. 09. 7. 1: procedure: Displacement 3. Appendix VIII (2.
EC) Nominal output at 6. Name and address of relevant, named nominal speed k. W - rpm location: Output speed 2. T. Fault: necessary. Possible cause: Possible cause: Possible cause: – Grass catcher box full.